-------- -------- --------
- For high-temperature applications such as electric heaters.
- Application: No mixing necessary. By hand trowel, apply a thin layer approximately 1/8" thick.
- Curing: Once Tracit is applied, curing may be expedited by applying heat up to 200°F when necessary. Otherwise, allow mastic to air-dry 24-48 hours or until completely hard before heating above 200°F. Do not heat hot enough to form steam during drying or to cause Tracit to boil, as this could cause cement to become porous and give poor heat transfer.
- Minimum temperature for application: 32°F
- Maximum usage temperature limits: 1250°F (675°C)
- Minimum usage temperature limits: -300°F (-182°C)
- Thermal conductivity: 70 BTU in/hr sq. ft°F
- U range: 20-40 BTU/hr/sq. ft.°F
- Shelf life: 1-2 years from date of manufacture in airtight container.
- Net weight: 15 lbs/gal.
- Soluble: Yes
- Harmful vapors: None
- Bonding strength: 200-275 lbs sq. in.
- Usable life of product: Indefinite; will perform for the life of the installation
- Typically a stock item
COVERAGE RATES:
Application based on cements applied at 1/8 inch thickness are approximately:
- Tracing-Applied by hand troweling
-3/8" O.D. tubing-32 linear ft./gal.
-1/2" O.D. tubing-28 linear ft./gal. - No minimum orders
- Product sold in 1 and 5 gallon cans, also quarts and pints upon special request.
Please contact us for MSDS requests.
Phone: (800) 804-4596 | Fax: (302) 328-0261 | sales@chemaxcorp.com
Please dial (302) 328-2440 if calling from outside the US
